eTRUCK

Do you have a truck on the side of the road with a clogged DPF filter?

‍

Now you can force a regen without being there, all you need is eTRUCK.

‍

eTRUCK is a compact tool that, once installed in the vehicle’s diagnostic socket* and configured in a few minutes, offers a brand new type of service. The workshop can constantly monitor the vehicle status remotely, manage its maintenance from a predictive point of view and perform vehicle adjustments to minimize downtime.

‍

eTruck can be used on trucks, agricultural and construction vehicles. It keeps the technician always connected with the vehicle helping increase customer loyalty thanks to a dedicated continuous assistance service. eTRUCK is the ideal solution also for drivers and fleet managers, as it keeps them constantly updated on the conditions of their vehicles.

‍

^{* 16 PIN OBD or Deutsch 9 PIN through special adapter for HD American Trucks.}

Advantages for workshops

Through the Workshop Portal, there is the possibility to increase customer loyalty thanks to a highly professional service, which allows them to:

• Constantly monitor the status of the vehicles remotely and to intervene on the electronic systems as if they were in the workshop.
• Manage the ordinary and extraordinary maintenance in advance.
• Share an appointment planner for the
  maintenance with the driver and the fleet manager.
• Manage the customer portfolio with a single software program.
• Create a detailed customer profile.

See the Workshop Portal here

See the Workshop demo area here

‍

Advantages for the drivers

Thanks to an APP^* that supplies very useful information while driving the vehicle, it is possible to:

• Read the Tachograph data in real time.
• Monitor your driving style.
• Fill out a Driver’s Daily Vehicle Check & Defect Report list as required by the regulations of certain countries.
• Read the vehicle data in real time.
• Have a remote vehicle diagnosis available that helps solving any fault quickly, avoiding having to go to the workshop.
• Consult the service calendar shared with the workshop.

^{* For Android and iOS}

See the driver demo area here

Advantages for the fleet manager

Through the Fleet Manager Portal, can:

• Check the entire fleet regarding the status of the vehicles at a maintenance level.
• Assist remotely, through the diagnosis and the solution of possible vehicle faults by the workshop, reducing costs and increasing efficiency.
• Monitor the status of the maintenance of the vehicles and their expirations.
• Share an appointment planner for the maintenance with the workshop.
• Detect each driver’s driving style.
• Download the Tachograph data remotely.
• SDownload remotely, directly from the ECU, the Trip Data Recorder, allowing detailed
  analyses of the use of the vehicle.

See the Fleet Manager Portal here

See the Fleet Manager demo area here

‍MODEL
TEXA eTRUCK

PROCESSOR
ARM Cortex M4 (STM32F439ZIY6)

MEMORY
SDRAM 8 MB; Flash NAND 4 GB

COMMUNICATION
Bluetooth Classic (2.1); Bluetooth 4.0 Low Energy (Smart Ready)

DIAGNOSTIC CONNECTOR
Presa OBD ISO15031-03 per sistemi a 24 V

SUPPORTED AUTOMOTIVE BUS TYPE

• 4 HS CAN transceivers connected to OBD pins 3-11,
  1-9, 12-13, 6-14 that can be enabled individually;
• 1 J1708 transceiver connected to pins 12-13; 1 ISO9141-2, ISO14230 transceiver with 60mA current protection connected to pins 3 or 7

VISUAL WARNINGS
1 green/red bi-coloured LED; 1 blue LED

INERTIAL SENSOR
Accelerometer: 3 axis, ± 16 G F.S.; Gyroscope: 3 axis, ± 2000 DPS G F.S.

SUPPLY VOLTAGE
12 / 24 Vdc

CONSUMPTION
Standby < 6 mA
Normal mode: 60 / 120 mA (12 / 24 Vdc)

DEVICE ACTIVATION
Possible from OBD pins 1 and 8 or by monitoring the battery voltage

OPERATING TEMPERATURE
– 20 °C ÷ 70 °C

STORAGE TEMPERATURE
– 40 °C ÷ 85 °C

ISM OPERATING FREQUENCY BAND
2400 – 2483.5 MHz

MAXIMUM TRANSMIT POWER IN FREQUENCY BAND
4 dBm

RELATIVE HUMIDITY
10% ÷ 80% without condensation

DIMENSIONS [mm]
47,8*23,4*24,4

WEIGHT
15 g

DIRECTIVES
RED 2014 / 53 / EU; ROHS 2011 / 65 / EU

PRODUCT STANDARDS
• EN 301 489-1 V2.1.1;
• EN 301 489-17 3.1.1;
• EN 300 328 V2.1.1;
• EN 62479:2010;
• EN 60950-1:2006 / A11+A1+A12+AC:2001+A2:2013;
• ISO 7637-1:2002; ISO 7637-2:2011

REGULATIONS
ECE / ONU R10

WARRANTY
1 year